Atec Teseq-ProfLine_2100 Manuel d'utilisateur télécharger pdf

Advanced Test Solutions for EMC

System

ProfLine 2100 is an accurate and ﬂ exible system designed to measure harmonics and ﬂ icker in accor-

dance with IEC 61000-3-2 and IEC 61000-3-3. This is a measuring system only and no AC source is sup-

plied. It can therefore be used with any suitable, clean AC source to measure and record any harmonics

and ﬂ icker created by the EUT. A wide range of AC sources are available from Teseq, please see ProfLine

2103, 2105, 2115, 2130, 2145 datasheets for suitable systems including power sources.

1- or 3-phase

ProfLine 2100 can be supplied as either a 1-phase or 3-phase measuring system and can measure

harmonics and ﬂ icker up to 16 Amps per phase. Measurements are made using precision, no burden,

active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acqui-

sition Card (DAQ) ﬁ tted inside a PC. Three current and one voltage measuring channels are dedicated

to each supply phase allowing simultaneous measurement of both current and voltage on all phases.

Calculations are made using dedicated Teseq software (WIN 2100) to determine harmonics (classes A-D),

inter-harmonics, ﬂ icker, dc, dt, dmax, Pst, Plt, inrush current and 24 x dmax.

Impedance

Measurement of ﬂ icker requires a ﬁ xed, stable source impedance as speciﬁ ed in IEC 61000-3-3 (0.24 Ω

+ j0.15 Ω in the line and 0.16 Ω + j0.1 Ω in the neutral). When supplied as a complete system (see ProfLine

2103, 2105, 2115, 2130 or 2145) which include a precision AC source, the impedance is provided by a

combination of a controlled source impedance and physical impedances supplied as part of the system.

Users of the ProfLine 2100 measurement system must take care to provide the necessary source imped-

ance. Hardware lumped impedances are available from Teseq, see options list.

HARMONICS AND FLICKER MEASURING SYSTEM

PROFLINE 2100 - OVERVIEW

Single phase version

Three phase version

Complete measurement system

Use existing power sources or

mains

1 2

PROFLINE 2100 - OVERVIEW 1

Résumé du contenu

Page 1 - PROFLINE 2100 - OVERVIEW

Advanced Test Solutions for EMCSystemProfLine 2100 is an accurate and ﬂ exible system designed to measure harmonics and ﬂ icker in accor-dance with IE

Page 2

Advanced Test Solutions for EMC ProfLine 2100-1 ProfLine 2100-3System contents CCN 1000-1 1-phase CCN 1000-3 1-phase coupling unit coupling u

Commentaires sur ces manuels

Pas de commentaire

Atec Teseq-ProfLine_2100 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Atec Teseq-ProfLine_2100. Atec Teseq-ProfLine_2100 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Atec Teseq-ProfLine_2100