Atec Agilent-81618A Manuel d'utilisateur télécharger pdf (Page 100)

Cleaning Information Which Cleaning Procedure should I use ?

100 Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition

• Deposit dissolved dirt in the groove, which can then dirty the

surface of an inserted fiber.

Preferred Procedure Use the following procedure on most occasions.

1 Blow away any dust or dirt with compressed air.

Procedure for Stubborn Dirt Use this procedure when there is greasy dirt on the adapter:

1 Clean the adapter by pushing and pulling a new, dry pipe cleaner

into the opening. Rotate the pipe cleaner slowly as you do this.

CAUTION Be careful when using pipe cleaners, as the core and the bristles of

the pipe cleaner are hard and can damage the adapter.

2 Clean the adapter by rubbing a new, dry cotton swab over the

surface using a small circular movement.

3 Blow away any remaining lint with compressed air.

How to clean lenses

Some lenses have special coatings that are sensitive to solvents,

grease, liquid and mechanical abrasion. Take extra care when cleaning

lenses with these coatings.

Lens assemblies consisting of several lenses are not normally sealed.

Therefore, use as little alcohol as possible, as it can get between the

lenses and in doing so can change the properties of projection.

Preferred Procedure Use the following procedure on most occasions.

1 Clean the lens by rubbing a new, dry cotton swab over the surface

using a small circular movement.

2 Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt Use this procedure when there is greasy dirt on the lens:

1 Moisten a new cotton swab with isopropyl alcohol.

2 Clean the lens by rubbing the cotton swab over the surface using a

small circular movement.

3 Using a new, dry cotton swab remove the alcohol, any dissolved

sediment and dust.

4 Blow away any remaining lint with compressed air.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 111 112

Pas de commentaire

Atec Agilent-81618A Manuel d'utilisateur Page 100