Atec AEMC-6250 Manuel d'utilisateur télécharger pdf

10A Micro-Ohmmeter

Model 6250

The 10A Micro-Ohmmeter Model 6250

is a rugged, low resistance tester

designed for plant maintenance,

quality control in manufacturing and

field use. Utilizing a four-lead Kelvin

method of testing, the Model 6250

is one of the more accurate Micro-

Ohmmeters available, with results

within 0.05% accuracy.

Resistance measurements are

automatically calculated and

displayed, taking into account the

measurement value, ambient

temperature, reference temperature

and metal temperature coefficient.

Sample temperature can be manually

entered by the operator or directly

measured by the Model 6250 with

an external RTD temperature probe.

The Model 6250 is uniquely designed

to conduct tests on both resistive and

inductive material, with operator

selection directly from the front panel.

Three test modes are available and

automatically employed based on

this selection:

Resistive materials (i.e. ground

bonding, coatings, contact resistances)

are tested with an instantaneous test.

Simply press the test button – the

reading is taken and the test is

concluded.

Inductive materials (i.e. coils, trans-

formers, motor windings) are tested

with a continuous test. The test is

started and stopped by the operator

at the push of a button.

Auto test mode is designed for

multiple test points on resistive and/or

low inductance material. The test is

started at the press of a button. As the

operator moves the probe from one

point to another, the test is stopped,

the results are displayed and a new

test is started when the test probes

again make contact – no need to

press the test button! Residual voltage

is measured between tests to ensure

proper results. This test mode

continues until the operator presses

the button to conclude the testing.

The large, easy-to-read display shows

the resistance measurement, ambient

and reference temperatures, metal

type and test method, as well as alarm

conditions and memory utilization, all

in real time. Previously stored test

results can easily be called up for

review on the display or sent directly

to a printer or remote terminal.

Two programmable alarm set points

are available. Each can be either

active high or low and will sound an

alarm when tripped, further adding to

the ease of use by permitting quick

Pass/Fail measurements.

External trigger operation is available

through the communication port

allowing the test to be conducted

from a remote location.

The list of features and functions goes

on and on. The Model 6250 will be a

valuable asset for your bond testing,

coil and contact testing as well as

coatings and connector or any other

low resistance testing application.

10A Micro-Ohmmeter Model 6250 (pdf) Rev. 04 0306

Technical Assistance (800) 343-1391 www.aemc.com

of 5

1 2 3 4 5

Résumé du contenu

Page 1 - Model 6250

10A Micro-OhmmeterModel 6250The 10A Micro-Ohmmeter Model 6250is a rugged, low resistance testerdesigned for plant maintenance,quality control in manuf

Page 2 - Applications

10A Micro-Ohmmeter Model 6250 (pdf) Rev. 04 0306Technical Assistance (800) 343-1391 www.aemc.com2of 5Features• Measure from 0.0001mΩ(0.1μΩ resolution)

Page 3 - Specifications

MODEL 6250ELECTRICALRange 5.0000mΩ 25.000mΩ 250.00mΩ 2500.0mΩ 25.000Ω 250.00Ω 2500.0ΩAccuracy 0.05% 0.05% 0.05% 0.05% 0.05% 0.05% 0.05% + + 0.5μΩ + 3μ

Page 4 - Accessories

10A Micro-Ohmmeter Model 6250 (pdf) Rev. 04 0306Technical Assistance (800) 343-1391 www.aemc.com4of 5ORDERING INFORMATION CATALOG NO.10A Micro-Ohmmete

Page 5 - Contact Us

10A Micro-Ohmmeter Model 6250 (pdf) Rev. 04 0306Technical Assistance (800) 343-1391 www.aemc.com5of 5Contact UsUnited States & Canada:Chauvin Arno

Commentaires sur ces manuels

Pas de commentaire

Atec AEMC-6250 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Atec AEMC-6250. Atec AEMC-6250 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Atec AEMC-6250