Atec Pacific-Power_GSeries Manuel d'utilisateur télécharger pdf

6 to 90 kVA

45 to 5,000 Hz

Efficiency (EFF)

Varies with type of load attached to the power source as follows:

EFF = 70–90% with predominantly power supply type loads.

EFF = 70% at maximum (125 V) output.

EFF = 65% at nominal (120 V) output.

EFF = 60% at low line (105 V) output.

Ambient Temperature

0 to 55°C Operating.

–40° to 85°C Nonoperating.

Humidity

0–95% relative humidity, noncondensating.

Cooling

Self contained fans provide forced air cooling. All air inlets are

filtered. Filters are replaceable and reusable.

Heat Dissipation

If system location is to be air conditioned, allow 800 BTU/hour

per kVA for a typical electronic load (higher for mixed or linear

loads).

NOTE: One ton of cooling = 12,000 BTU/hour.

Ventilation required to maintain less than a 10°C rise in the

ambient temperature for a typical electronic load:

390-G – approximately 600 CFM.

Input/Output Service Connections

Input and output connections are made via a heavy duty

terminal block mounted inside NEMA-approved junction boxes

that are located on the lower rear panel of the mainframe.

Allow an additional 3.25˝ to overall depth for junction box

clearance, or 5.25˝ when “T” output option is specified.

Solid State AC Power Conversion

• Programmable AC test power, 45 to 5,000 Hz.

• Power line susceptibility tests: spike, sag, surge.

• Flexible, expandable lab power.

• Precision frequency conversion.

• High reliability UPS.

For Application Engineering Assistance

Contact the factory directly

Consult your local PPS Representative

17692 Fitch, Irvine, CA 92614 USA

Call direct: +1 949-251-1800 • Fax: +1 949-756-0756

US: 800-854-2433

E-mail: sales@pacificpower.com • www.pacificpower.com

G Series

AC Power Systems

www.pacificpower.com

T h e P o w e r o f E x p e r t i s e

As a privately held, leading manufacturer of high-quality AC Power Conversion

Equipment, Pacific Power Source, Inc. offers standard catalog products that

range in power from 500 VA to >625 kVA. Low-power products include line

conditioners, frequency converters and Programmable AC Power Sources.

High-power systems include programmable power test equipment, power line

conditioners, frequency converters and uninterruptible AC Power Sources.

The Leader in Power Technology

Founded in 1971, the Irvine, California, company was an early pioneer

in the development of linear solid-state power conversion for use in

high-reliability applications. The company now manufactures both

advanced linear and broadband switching types of AC Power Sources.

Mechanical Specifications

Dimensions 390-G

A. Height w/caster base 78˝

B. Height w/forklift base 78.5˝

C. Width 23˝

D. Depth 34.5˝

Weight 1,000 Lbs.

Air Flow 2,000 CFM

Each G Series mainframe is provided on a caster base

with leveling feet for ease of installation.

Forklift or shock mount base is optionally available.

Consult the factory for details.

Environmental Characteristics

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - G Series

6 to 90 kVA45 to 5,000 HzEfficiency (EFF)Varies with type of load attached to the power source as follows:EFF = 70–90% with predominantly power supply

Page 2 - System Configuration

Precision PerformanceDesign ExcellenceUnmatched FlexibilityThe simple basic design concepts used in Pacific Power G Series equipment have resulted in

Page 3

Precision PerformanceDesign ExcellenceUnmatched FlexibilityThe simple basic design concepts used in Pacific Power G Series equipment have resulted in

Page 4 - Control and Power Options

Model Number InformationStandard Models are complete systems ready for use, including cabinets, oscillators, input circuit breakers and outputcontacto

Page 5

Model Number InformationStandard Models are complete systems ready for use, including cabinets, oscillators, input circuit breakers and outputcontacto

Page 6 - Electrical Specifications

Output PowerSee model listings for appropriate full power ratings.Output VoltageNominal system voltage is 125 V L-N three phase or single phase. Outpu

Page 7

Output PowerSee model listings for appropriate full power ratings.Output VoltageNominal system voltage is 125 V L-N three phase or single phase. Outpu

Page 8

6 to 90 kVA45 to 5,000 HzEfficiency (EFF)Varies with type of load attached to the power source as follows:EFF = 70–90% with predominantly power supply

Commentaires sur ces manuels

Pas de commentaire

Atec Pacific-Power_GSeries Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Fournisseurs d'énergie Atec Pacific-Power_GSeries. Atec Pacific-Power_GSeries User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Fournisseurs d'énergie Atec Pacific-Power_GSeries