Atec IFI-PT186-2KW Manuel d'utilisateur télécharger pdf

August 09 2012

IFI Pulse TWT Amplifier Specifications

IFI Model:

PT186-2KW

Frequency Range:

6.5-18 GHz

Rated OP Pulse:

2000 Watts

1500 Watts minimum; (7.0-18GHz)

Gain @ rated power:

63 dB minimum

Prime Power:

120/240 VAC +/-10%, 50/60 Hz, Single Phase

Input/Output Impedance:

50 ohms (VSWR 2.0:1)

RF I/O Connectors:

N-F / WRD650

Input/Output VSWR:

2.0:1

Pulse Input:

BNC Female Front Panel

Pulse Width:

150 nsec nominal – 100 µsec maximum

PRF Range:

0 – 100 KHz

RF Pulse on/off ratio:

80 dB minimum

Duty Cycle:

Up to 6%

Rise & Fall Time:

25 nsec maximum, 15 nsec nominal

Pulse to Pulse Jitter:

<0.1 dB

Pulse Width Jitter:

±5 nsec maximum

Pulse Delay:

250 nsec maximum

Pulse to Pulse Stability:

+/-0.1 dB

Temperature / Altitude:

0º to 50º C / Altitude:10,000 feet

Non-operating Temp:

-20º to 70º C (50,000 feet max)

Weight:

90 pounds maximum, 70 pounds typical

Cooling System:

Air cooled, self contained

Modulation:

AM/FM/Pulse

Configuration:

10.5”H x 19”W x 25.25”D, ~70lbs (smaller units available consult factory)

Features:

VSWR Protection against any output mismatch; will operate without damage or

oscillation against any magnitude and phase of source and load impedance.

GPIB IEEE 488 & RS232 Remote Control

Forward RF Sample Port on the Front Panel, Type N-F connector

Internal Pre-amplification to obtain rated output power with an input level of

0dBm or less.

RF Input Connector on the Front Panel

RF Output Connector on the Rear Panel

Internal Systems Diagnostics

Filament/Beam Elapsed Time Metering in hours

RF Safety Interlock, Type BNC Connector

Forward/Reflected Power Indication simultaneously on Front Panel display

1 2 3

Résumé du contenu

Page 1

August 09 2012 IFI Pulse TWT Amplifier Specifications IFI Model: PT186-2KW Frequency Range: 6.5-18 GHz Rated OP Pulse: 2000 Watts 1500 Watts mini

Page 2

August 09 2012 IFI Pulse Series of TWT Amplifiers Complete TWT Protection Safety Requirement of IEC-348 VSWR Reflected Power Protection (reverse

Page 3

August 09 2012 IFI PT Series Amplifiers are pulsed amplifiers that amplify RF signals applied to the RF input. This amplifier has a Pulse input co

Commentaires sur ces manuels

Pas de commentaire

Atec IFI-PT186-2KW Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Atec IFI-PT186-2KW. Atec IFI-PT186-2KW User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Atec IFI-PT186-2KW