Atec Agilent-N9038A Manuel d'utilisateur

N9038A MXE EMI Receiver20 Hz to 8.4 and 26.5 GHzData Sheet

101 dB gain compression (two-tone)RF Input 1; RF2 Input to 1 GHz; RF Input 2 performance = RF Input 1 performance +9 dB 5 to 50 °C Tota

11Displayed average noise level (DANL) (continued)(Input terminated, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain

12Indicated noise in CISPR BWCalculated from DANL data; EMI-AVG detector, 0 dB input attenuation; indicated RBW is CISPR RBWRF Input 1; RF Input 2 to

13Spurious responsesRF Input 1; preselector on and offResidual responses 1 (Input terminated and 0 dB attenuation) 200 kHz to 8.4 GHz (swept) Zero sp

14Preselector off, preamp on Two –45 dBm tones at preamp input 110 to 500 MHz500 MHz to 3.6 GHz3.6 to 26.5 GHz +4 dBm (nominal)+5 dBm (nominal)–15

15Channel powerAmplitude accuracy, W-CDMA or IS95 (20 to 30 °C, attenuation = 10 dB)± 0.82 dB (± 0.23 dB 95th percentile)Occupied bandwidthFrequency a

16General SpecificationsTemperature rangeOperating 0 to 55 °CStorage –40 to 70 °CEMCComplies with European EMC Directive 2004/108/EC • IEC/EN 61326-2-

17Power requirementsVoltage and frequency (nominal) 100 to 120 V, 50/60/400 Hz220 to 240 V, 50/60 HzPower consumption On Standby450 W maximum20 WD

18Front panelRF input RF Input 1 Connector RF Input 2 ConnectorType-N female, 50 Ω (nominal) (Standard)3.5 mm female (Opt C35)Type-N female, 50 Ω (

19Rear panel (continued)Monitor output Connector Format ResolutionVGA compatible, 15-pin mini D-SUBXGA (60 Hz vertical sync rates, non-interlaced)

2Table of ContentsDefinitions and Conditions ...3Frequency

20Resolution bandwidth (spectrum measurement)Range Overall Span = 1 MHz Span = 10 kHz Span = 100 Hz100 mHz to 3 MHz50 Hz to 1 MHz1 Hz to 10 kHz100

www.agilent.comwww.agilent.com/find/mxeFor more information on Agilent Tech-nologies’ products, applications or services, please contact your local Ag

3Definitions and ConditionsSpecifications describe the performance of parameters covered by the product warranty and apply to the full temperature rang

4Frequency range DC coupled AC coupledInput 1 Option 508 Option 52620 Hz to 8.4 GHz20 Hz to 26.

5Sweep time and triggeringRange Span = 0 HzSpan ≥ 10 Hz1 μs to 6000 s1 ms to 4000 sAccuracy Span ≥ 10 Hz, sweptSpan ≥ 10 Hz, FFTSpan = 0 Hz± 0.01 % (n

6Analysis bandwidth 1Maximum bandwidth Option B25Standard25 MHz10 MHzVideo bandwidth (VBW)Range 1 Hz to 3 MHz (10 % steps, E24 series 24 per decade),

7Amplitude Accuracy and Range SpecificationsAmplitude rangeMeasurement range Displayed average noise level (DANL) to maximum safe input levelInput atte

8Frequency response (continued) Specification 95th percentile (≈ 2σ)Preselector on, preamp off 20 Hz to 300 MHz 1300 MHz to 1 GHz1 to 3.6 GHz3.5 to 8.

9Input voltage standing wave ratio (VSWR) Input attenuation 0 dB Input attenuation ≥ 10 dBPreselector off, preamp on and off 1 to 18 GHz 3.0:1 2.0:1Pr